BENQ Corporation
18
3.1.2.1.2.1 GPRS Connection setting
Please select networking-> GPRS to bring up the GPRS Connection panel.
$
First time User
1. If this is the first time you using W10
(W11) connecting GPRS
,
you need to
create one new connection profile.
Please press “New” in the control panel
of GPRS connection.
2. After selecting “New”, the sub-menu
will pop-up. (Please inquire the
operator of your SIM card provider
about the GPRS configuration.)
a. Name your GPRS connection at
the Profile Name, ex. GPRS.
b.
Input the APN number provided
by your GPRS operator, for
example you may put “internet”
at this box. Please inquire and
follow your GPRS service provider’s setting.
c. ID/
Password
Please input your ID and Password, if requested by GPRS service provider.
d. Select “OK” to confirm the settings, or select “Cancel” to give up the setting.
3. After complete the setting, the name of GPRS profile setting will show up at the Profile name
list dialogue box.
4. Select the profile name from the list and push “Connect” to start connecting to GPRS network.
5. Should connecting to GPRS network successfully, the status of GPRS connection will be shown
on the system tray.