![background image](http://html1.mh-extra.com/html/benq/3d-glasses/3d-glasses_quick-start-manual_2733483002.webp)
5
English
This glasses support DLP-LINK 3D Ready projectors. When DLP-LINK signal has not been detected for 180
seconds, the 3D glasses will automatically turn off.
The 3D glasses will blink when the batteries are reaching the end of life.
WARNING: The 3D glasses are not prescription eyewear, sunglasses, nor a protective goggle. Do not use the
glasses for any general eyewear purposes (e.g., driving, reading, protection
from sunlight or ultraviolet light,
etc.) as such use may result in injury.
Cleaning the lenses
Clean the lenses whenever you notice dirt or dust on the surfaces.
•
Clean the lenses with a commercially available blower and/or lens cleaner.
•
If there is dirt or smears, use lens-cleaning paper or moisten a soft cloth with lens cleaner and gently wipe
the lens surfaces.
Never rub the lenses with abrasive materials.
Nose piece
Replace with one of two sizes for
a comfortable fit
!
6
English
WARNING: To avoid the damage of battery cover, be sure to follow the steps as illustrations for battery
installation.
!
4
English
Light Sensor
Do not block
Battery cover
Remove battery cover, then install
two CR2032 type batteries.
ON button
Press to start 3D function > Switch
inverse images between your eyes
4
English
Light Sensor
Do not block
Battery cover
Remove battery cover, then install
two CR2032 type batteries.
ON button
Press to start 3D function > Switch
inverse images between your eyes
4
English
Light Sensor
Do not block
Battery cover
Remove battery cover, then install
two CR2032 type batteries.
ON button
Press to start 3D function > Switch
inverse images between your eyes