English
Installation Steps
8
Installation Steps
A
Knob color indication
Gray
Yellow
Black
B
C
D
E
F
Knob A (gray)
Knob B (yellow)
Knob C (black)
G
5. Adjusting the projection angle
A. By adjusting the tightness of the socket head screw (G)
using the hex wrench (K), you can adjust the desired
angle of the projector cantilever. Tighten the socket head
screw (E) by using a 5mm hex wrench (K), then replace
the upper and lower plastic caps (M)(N).
B. Push the knobs forwards to adjust the required projection
angle.
C. The gray knob (A) is used to adjust the sideways rotation
angle of the projected image.
D. The yellow knob (B) is used to adjust the angular
displacement of the top and bottom of the projected
image.
E. The black knob (C) is used to adjust the horizontal
angular movement of the projected image.
F. Be sure to push back and tighten the knobs securely after
making any adjustment.
