Headset Bluetooth Clip (en)
© Sie
m
en
s AG 20
05,
C:
\_
Christine\
Acc
essor
ies\
neuer
Projektord
ner\
HH
B-
130_
131_
Headset_B_
Clip\0
5GUW001
03
left page (6)
of Headset Bluetooth Clip HHB-130/131 en, A31008-XXXX (25.04.2006,
6
Templa
te: X75, Versi
on 2.2;
VAR L
anguage: unkn
own;
VAR issue date: VAR_Iss
ue_DATE
1. Plug the charger
9
into the
headset
7
as shown.
2. Plug the power connector of
the charger into a mains po-
wer socket.
The device is not ready for oper-
ation while charging. It switches
off automatically during charg-
ing and must be switched on
again when charging is
completed.
Charging time
After two hours the battery is ap-
proximately 80% charged; the
device needs about 3.5 hours to
charge fully.
Display when charging is in
progress
The LED lights continuously dur-
ing the charging process. When
the battery is fully charged, the
LED goes out.
The battery should only be charged in
an ambient temperature of 0°C to
45°C, otherwise it will wear out pre-
maturely. Please remember that
batteries are subject to wear.
