12/ 2017
16
Operating instructions
BENNING PV 2
-
Table of contents
1. User notes
2. Safety note
3. Scope of delivery
4. Unit description
5. General information
6. Environment conditions:
7. Electrical specifications
8. Making measurements with the BENNING PV 2
8.1 Preparations for making measurements
8.1.1
Switching the BENNING PV 2 ON/ OFF
8.1.2 Setting the automatic switch-off time (APO, Auto-Power Off)
8.1.3 Setting the date and the time
8.1.4 Testing the battery condition
8.1.5 Compensation of the measuring leads (null balance)
8.2 Testing the protective conductor resistance (RPE)
8.3 Automatic measurements on the PV generator
8.4 AC/ DC voltage measurement
8.5 Current measurement by means of optional AC/ DC current clamp adapter BENNING CC 3
8.6 Insulating resistance measurement RISO (2-pin)
8.7 Measured value memory
8.7.1 Storing measured values
8.7.2 Calling measured values
8.7.3 Deleting the measured value memory
8.7.4 Reading out the measured value memory via the USB interface
8.7.5 Representing the I-V characteristic via an Android device
8.8 Radio connection to insolation / temperature measuring instrument BENNING SUN 2
8.8.1 Coupling with BENNING SUN 2
8.8.2 Decoupling from the BENNING SUN 2
8.8.3 Activating / deactivating the radio transmission of the BENNING SUN 2
9. Maintenance
9.1 Error codes
9.2 Securing the instrument
9.3 Cleaning
9.4 Battery replacement
9.5 Fuse replacement
9.6 Calibration
9.7 Spare parts
10. Environmental notice
1. User notes
This operating manual is intended for qualified technical personnel! Qualified
technical personnel is competent to identify risks and to prevent possible
hazards. Improper handling involves the risk of injury!
Warning of dangerous electric voltage!
Absolutely observe all safety instructions!
