09/ 2016
BENNING CC 3
7
Operating instructions
BENNING CC 3
Current clamp adapter for direct and alternating current measurement
Contents
1. User notes
2. Safety note
3. Scope of delivery
4. Description of appliance tester
5. General information
6. Environment conditions:
7. Electrical specifications
8. Making measurements with the BENNING CC 3
9. Maintenance
10. Environmental notice
1. User notes
These operating instructions are intended for
- skilled electricians and
- trained electrical personnel.
The BENNING CC 3 is intended for making measurements in dry environ-
ment. It must not be used for making measurements in electric circuits with a
nominal voltage greater than 600 V DC/ AC (for further details, see Section 6.
“Environmental conditions”).
The following symbols are used in these operating instructions and on the
BENNING CC 3:
Application around and removal from HAZARDOUS LIVE conduc-
tors is permitted.
Warning of electrical danger!
Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!
The symbol indicates that the information provided in the operating
instructions must be complied with in order to avoid risks.
This symbol on the BENNING CC 3 means that the BENNING CC 3
is totally insulated (protection class II).
This symbol on the BENNING CC 3 means that the BENNING CC 3
complies with the EU directives.
(AC) Alternating voltage or current.
(DC) Direct voltage or current.
Earth (voltage against earth).
