Benning 044168, Operating Manual

Page: 11 / 22

Safety
2.4 Intended use
5190 / 04/2021 en BENNING TA 6 11
2.4 Intended use
Only use the device within the framework of the corresponding technical data. Any operating
conditions that deviate from this shall be considered as improper use. Solely the user of the
device shall be liable for any resulting damage.
In particular, note the following:
• In case of improper use, the liability and warranty claims become void. Solely the user of the
device shall be liable for any damage resulting from improper use. Uses not complying with
the intended use include e. g.:
– Use of components, accessories, spare or replacement parts that have not been
released and approved for the respective application by Benning
– Non-observance, manipulation, changes or misuse of the operating manual or the
instructions and notes contained therein
– Any form of misuse of the device
– Any use other than or beyond that described in this operating manual
• Warranty and liability claims are generally excluded if damage is due to force majeure.
• If any prescribed services are not performed regularly or not on time according to
manufacturer specifications during the warranty period, a decision about a warranty claim
can only be made once the findings are available.
Direct any questions to Technical Support [
}
page 8].
Using the device
Please observe the following basic obligations when using the device:
• The device may only be used in a technically perfect and safe condition. Always check the
device for damages before using it.
• Make sure the personnel using the device is qualified for the respective task.
• Observe relevant regulations on occupational safety and health as well as those on
environmental protection.
• The device may only be used in dry environments.
• Use the device exclusively for measuring purposes with the BENNING IT 115, IT 130 and
IT 200 installation testers. In addition, observe the operating manual of the installation
tester.
• The device is intended for short-time use only (continuous operation is not permitted).
Disconnect the device from the test object after use.
• Use the device only in electric circuits of overvoltage category II with a conductor for a
maximum of 300 V to earth.
WARNING
Opening the device
Danger to life or serious injury is possible due to contact with high electric voltage when opening
the device. The device might get damaged.
• Do not open the device.
• Please contact your specialty retailer or the returns management [
}
page 8] for any repairs.