Musto Performance Skiff – Rigging Guide (v0.4)
8 of 19
Fitting the boom, vang and mainsheet
27. Place the rigged boom in the cockpit
28. Remove the pin in the lower gooseneck and fit it through
the boom.
29. Attach the main halyard to the outhaul
30. Cleat the outhaul off in the centre of the boom
31. Pull some of the main halyard through so the boom is in
the approximate position that you would expect when sailing
32. Rig the mainsheet starting with a bowline on the block
attached to the mainsheet bridal. Then thread it through the
front block on the boom.
