Programming
Bennett HF H35 Instruction Manual
55
MENU CODE 30
–
HOW TO SET THE REAL TIME CLOCK
Menu Code 30 allows the manager or operator to set the real time clock on the dispenser. The real time clock keeps track of the
current date and time.
•
The current date in menu code 30 is displayed as yy/mm/dd.
•
The current time in menu code 30 is displayed as hh:mm, which is military time.
PROGRAMMING PROCEDURE
1.
Press the number
2
and
9
, then the [
MODE
] button on the keypad.
The top left price display shows the dispenser is in Menu Code 29.
The first digit shows that it is displaying the totals for the mass of
Product 1. The bottom left price display shows that it is displaying
side 1.
2.
To reset the totals, select the desired total and press the
0
button.
WARNING: THIS STEP ZEROS ALL THE MASS TOTALS IN THIS
MENU CODE. MAKE SURE ALL METER TOTALS ARE RECORDED
BEFORE PROCEEDING WITH THE NEXT STEP. DATA CANNOT BE
RETRIEVED.
3.
Press the [
CANCEL
] button to exit this menu code.
Figure 4.47
–
Total Mass Amount
Figure 4.48
–
Reset Mass Total
PROGRAMMING PROCEDURE
1.
Press the number
3
and
0
, then the [
MODE
]
button on the keypad.
2.
Enter the last two digits of the current year, month, and date
(yy/mm/dd).
3.
Enter two digits for the current hour and two digits for the current
minute in military time (hh:mm).
4.
Press the [
ENTER
] button to save the new setting.
Note:
If an error is
made, press the correct number. The new number will replace the
error.
5.
When the correct date and time appears in the main display, press the
[
ENTER
] button to save the selection.
6.
Press the [
CANCEL
] button to exit this Menu Code.
Figure 4.49
–
Real Time Clock
Sale $
2345
Kilograms
678.901
02 .29
-- 1
Sale $
1234
Kilograms
567.890
7. 29
Sale $
1509
Kilograms
231400
code
30
Year (yy)
Month (mm)
Date (dd)
Hour (hh)
Minute (mm)
Summary of Contents for HIGH FLOW H35
