Bennett HIGH FLOW H35, Instruction Manual

Page: 55 / 98

Programming
Bennett HF H35 Instruction Manual 51
MENU CODE 26 – HOW TO RESET SHIFT TOTALS
Menu Code 26 allows the manager or operator to read and reset the electronic re-settable shift hose totals that accumulate in
the dispenser for money, mass, number of sales, and number of price changes. The manager can reset after each shift, at the end
of each day or any other period of time. The resetting feature is accessed through Menu Code 26. The totals in Menu Code 1 are
not affected and will continue to accumulate totals until there is a RAM memory clear.
PROCEDURE – READING MONEY TOTALS
1. Press the number 2 and 6 , then the [ MODE ] button on the keypad.
a. The main display shows the total money amount. For example,
if the total money amount for the dispenser is $7,890,123.45,
the display appears as in
Figure 4..
b. The PPM display window reads P1 1.d for Product 1, Money
Total.
2. To read the money totals for Product 2 press the [ ENTER ] button. The
PPM display reads P2 1.d for Product 2, Money Total.
Figure 4.38 – Money Total
PROCEDURE - READING MASS TOTALS
1. Press the [ DOWN-ARROW
↓ ]
button. The main display shows the
total mass amount. For example, if the total mass amount for the
dispenser were 901,234.567 gallons, the display would appear as
in
Figure 4. .
2. To read the mass totals for Product 2 press the [ ENTER ] button.
Figure 4.39 – Hose 1 Mass Total