Bennett 515-XP Pump Controller Instruction & Service Manual
Product Introduction
4
515-XP PUMP CONTROLLER ASSEMBLY
The 515-XP Pump Controller uses optical isolation to isolate the pump data communication lines from the 515 electronics.
HARDWARE CONNECTIONS
The 515-XP Pump Controller has four
FUEL ONLY
communication ports that are used to communicate to various third party point-of-sale
providers. The communication (ports 1 through 4) are D connector panel mount, 9-pin female type. A male DB9 serial cable
must be
used
to connect directly to the port using a straight through cable.
•
Port 1 - Tokheim SCS Protocol
•
Port 2 - Veeder-Root ASR Protocol
•
Port 3 - Bennett Remote Fuel Control Protocol
•
Port 4 - Bennett Remote Fuel Control Protocol
DISPLAY AND KEYPAD ASSEMBLY LAYOUT
A 4 x 20 LCD screen is used to display diagnostic, programming, and start-up messages.
The numeric and function keys on the keypad are
used to access various managers’ modes.
ITEM DESCRIPTION
1
Display Assembly
2
Display Cable
3
Enclosure
4
Circuit Board Assembly
5
Power Supply Port (2 Position Plug)
6
Manager’s Keypad Port (Ribbon Cable)
7
Communication Ports (Female DB9)
N/A
Front Cover (not shown)
N/A
Manager’s Keypad
(not shown)
N/A
VeriFone Adapter (not shown)
FRONT VIEW
Port 1
Port 2
Port 3
Port 4
SIDE VIEW
7
5
6
Display
Manager’s Keypad
1
3
4
2
P/N 140003
