TROUBLESHOOTING
11
PROBLEM
POSSIBLE CAUSE
SOLUTION
The lid won’t secure.
Place the seal gasket in the proper
position.
Push the bar slightly.
Difficult to open the lid.
Lift up the pressure regulator to release
steam until the floating valve drops,
then turn the lid to open it.
The seal gasket is not properly placed.
Floating valve is stuck on the bar.
Floating valve does not drop after
pressure release.
Steam leaking around the
lid.
Place the seal gasket.
Clean the seal gasket.
Seal gasket is not placed.
Steam leaking around the
floating valve.
(The floating valve is
located under the pressure
regulator, on the inside of
the lid)
Clean the seal gasket of the floating
valve.
Food stuck in the seal gasket of floating
valve.
The floating valve will not
rise.
Add food and water according to the
directions.
Too little food and water.
Send to an authorized Tevo repair
centre. See page 12 for contact details.
Leakage around the lid or pressure
displaying valve.
Replace the seal gasket of the floating
valve. See page 12 for contact details.
The seal gasket of floating valve is worn
out.
Food stuck in seal gasket.
Replace the seal gasket. See page 12
for contact details.
Damaged seal gasket.
Check that the lid is secured according
to the directions.
The lid is not properly secured.
Summary of Contents for 6L Pressure Chef
Page 15: ......
