Bennett Marine
550 Jim Moran Boulevard
Deerfield Beach, Florida 33442
USA
Phone: +1.954.427.1400
Fax: +1.954.480.2897
IMPORTANT: FOR BOATS KEPT IN SALTWATER
To provide protection from electrolytic corrosion a zinc anode must be applied to each Tab or, in the case of Tabs
installed on the boat as original equipment by the builder, a bonding system may be utilized for your particular
model. For the SST system the top portion of the Actuator and the Actuator Shaft are electrically isolated. Therefore
the Trim Plane and the upper part of the Actuator must be individually protected or integrated into a bonding system.
Trim Tabs and Actuators may be painted with anti-fouling paint to prevent fouling by marine growth.
Follow paint manufacturer’s recommendations for proper priming and painting of 304 stainless steel.
Note: Do not paint under zincs in order to achieve maximum electrical contact to trim tabs.
Summary of Contents for SST System
Page 1: ...Installation Instructions...