Bennche Bighorn 400, Owner'S Manual, Page: 77 / 181

6-8 Operation
rpm’s so the engine can rid itself of the
temporary build up of heat. If any
abnormality is noticed during this period,
consult a service center.
0-10 Hours:
Avoid continuous operation above half
throttle. Allow a cooling off period of five to
ten minutes after every hour of operation.
Vary the speed of the vehicle from time to
time. Do not operate it at one set throttle
position.
10-25 Hours:
Avoid prolonged operation above 3/4 throttle.
Rev the vehicle freely but do not use full
throttle at any time.
After Break-In:
The vehicle can now be operated normally.
Brake System Break-in
Apply only moderate braking force for the
first 50 stops. Aggressive or overly forceful
braking when the brake system is new could
damage brake pads and rotors.
CVT Break-in (Clutches/Belt)
A proper break-in of the clutch and drive belt
will ensure a longer life and better
performance. Break in the clutch and belt by
operating at slower speeds during the
break-in period as recommended. Pull only
light loads. Avoid aggressive acceleration
and high speed operation during the break-in
period.
Parking
When parking, stop the engine and shift the