BENISON V5
- 10 -
Low Power Adjustment
1. In the adjustment mode, Press the [
8]
key.
2. Hold down the
PTT
key to start transmission.
3. While watching the reading of the TX power meter, Press the
UP
or
DOWN
key set the output power to
the value closest to 1 W.
4. When the
PTT
key is released.
5. Press the SQL key to return.
Sensitivity Adjustment
1. In the adjustment mode, Press the [1]/[2]/[3]
key.
2. Press the
UP
or
DOWN
key Set the minimum frequency sensitivity.
3. Press the SQL key to return.
Deviation
1. In the adjustment mode, Press the [
5]
key.
2. Input a 30mVrms, 1000Hz signal with your transceiver tester through the external microphone jack.
3. With the tester, put the transceiver in the transmission mode.
4. Press the
UP
or
DOWN
key until the deviation is set to ±2.5KHz.
5. Press the SQL key to return.
PARTS LIST
