BeneVision TMS60, Operator'S Manual

Page: 207 / 250

Maintenance Regular Check
TMS60 Operator’s Manual 16 - 3
16.3 Regular Check
Perform a visual inspection before the equipment is first used every day. Verify that the
equipment meets the following requirements:
■
The housing and display screen are free from cracks or other damages.
■
All keys funtion properly.
■ Connectors are not loose, cracked, or bent and cables have no cuts, nicks, or
fraying.
■
ECG leadwires are securely connected with the equipment
■
Battery pack is installed and has sufficient charge.
After your equipment has been used for 6 to 12 months, or whenever your equipment is
repaired or upgraded, a thorough inspection should be performed by qualified service
personnel to ensure the reliability.
Follow these guidelines when inspecting the devices:
■
Make sure that the environment and power supply meet the requirements.
■
Inspect the devices and their accessories for mechanical damage.
■ Inspect all plugs, connectors, leadwires for damage, and make sure that their
insulation is in good condition.
■
Make sure that only specified accessories are applied.
■
Make sure that the alarm system functions correctly.
■ Make sure that the battery meet the performance requirements.
■
Make sure that the devices are in good working condition.
In case of any damage or abnormality, do not use the devices. Contact the hospital’s bio-
medical engineers or your service personnel immediately.