BeneVision TM80, Operator'S Manual

Page: 123 / 240

BeneVision TM80 Telemetry Monitor Operator’s Manual 10 - 5
10.4 Screen Display after Pairing a Telemetry Monitor
with a BP10
When a telemetry monitor is paired with a BP10 successfully, measured NIBP values will be
displayed on the main screen of the telemetry monitor as shown in the following figure.
1. The last NIBP measurement time
2. Systolic pressure alarm limits
3. Systolic pressure
4. Diastolic pressure
5. Diastolic pressure low limit
6. Diastolic pressure high limit
7. Mean pressure (displayed after measurement is completed) or cuff pressure (dis-
played during measurement)
8. Mean pressure alarm limit
9. NIBP measurement mode: Manual, Auto, Seq., ABPM.
10. NIBP unit
11. NIBP measurement history area: displays NIBP measurement history information.
10.5 Interactions after Pairing a Telemetry Monitor with a
BP10
10.5.1 Overview of Interactions
Once a telemetry monitor is paired successfully with a BP10, the interactions proceed as
shown below.
7 3 4 5
1
6
8
9
11
2
10