Page 18 of 24
Pumping out:
1. Locate the nearest pumpout station and consult the directions there.
2. The holding tank caps are located on the port/starboard decks.
3. Apply tight seal with the pump nozzle and remove effluent.
4. Rinse the tank with hose water and repeat the pumpout.
5. Flush the pumpout hose with sea water and replace.
6. Place ½ cup of holding tank deodorant in the toilet bowl and flush through.
7. Tighten the holding tank cap on the boat.
DO NOT CONFUSE THE HOLDING TANK CAP AND THE DIESEL FUEL TANK FILLER CAP.
BOTH ARE LABELLED. READ BEFORE USING EVERY TIME.
PUMPING OVERBOARD
Both holding tanks are equipped with overboard discharge valves to only be used in areas where it is
permitted to discharge overboard. The Starboard tank discharge valve is located below the floorboards in the
double bunk cabin. The Port tank discharge valve is located in the bottom of the vanity cabinet in the Port
side head.