BENETEAU ANTARES 36 Owner'S Manual Download Page 135

Page: 135 / 184

197855 RCD-2
Index B

135

13.5 ENGINE WATER INTAKE VALVE

The sea water intake valve plays a crucial role in ensuring that the engine runs well.

- Keep the strainer under the hull as clean as possible;

- brush the strainer whenever the boat is lifted out.

This valve must absolutely always be opened before starting the engine.

A sea water filter filters the water before it goes through the heat exchanger.

Regularly inspect the sea water filter and clean it if necessary. Screw/unscrew the cover of the filter by hand (never use tools for this).

For lengthy absences, close the engine's sea water intake valve.

Sea water intake

Sea water filter

Engine

Summary of Contents for ANTARES 36

























































































































































































Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands

BENETEAU ANTARES 36, Owner'S Manual

Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands