BENETEAU ANTARES 36 Owner'S Manual Download Page 130

Page: 130 / 184

130

197855 RCD-2

Index B

13.1 INFORMATION ABOUT THE RISKS OF FIRE AND OF EXPLOSION OF ENGINES

- Make sure that the coolant is circulating properly.

- Ensure that the engine compartment ventilation air inlets are kept clear.

- Stop the engine and refrain from smoking during fuel tank filling.

- Get your fuel circuit checked regularly by a professional engineer.

- Avoid any contact between inflammable materials and the hot sections of the engine.

- Never switch off or de-energise the electric system when the engine is running.

- Never block the access of the fuel supply valve.

- Do not obstruct or modify the ventilation system.

- Never turn the engine over when the boat is on land.

- Fuel stored outside the tanks (jerrycans, portable fuel tanks, etc.) must be stowed on deck, protected from bad weather and mechanical damage.

- Regularly check that the engine compartment is clean and dry.

Engine water intake valve:

Location: Cockpit locker

Fuel supply valve

located directly on the tank

Engine

Summary of Contents for ANTARES 36

























































































































































































Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands

BENETEAU ANTARES 36, Owner'S Manual

Search results

Summary of Contents for ANTARES 36

Reviews:

Related manuals for ANTARES 36

Brands by name

Popular brands