1. IRIS
Select the lens type, ELC/ALC selectable. Default setting is "ELC".
ELC: Eletronic Light Control, for Manual Iris lens. ALC: Automatic Light Control, for DC Iris lens
2
. FOCUS ADJ
This function is to help you make cameras focus well of all area. When it is activated
3
. EXPOSURE
1) BRIGHTNESS: Setting output brightness. Default setting is 10.
2) SHUTTER: Selecting shutter mode: AUTO / Manual / FLIK and it is also adjustable from
1/25-1/50000. It is adjustable from X2-X30 under Sense-up condition. Default setting is "AUTO".
3) SENSE-UP: OFF/X2/X3/X4/X5/X6/X7/X8. It is only available under the AUTO shutter mode.
Default setting is "X2".
4) AGC: Setting from 0 to 10. Default setting is 10.
4
. BACKLIGHT
Backlight compensation: OFF / HLC / BLC / WDR
● SUBMENU OF HLC:
LEVEL: Setting the sensitivity of compensation area. Default setting is "10".
COLOR: Setting the color of high light compensation area, including BLK(black) / WHT(white) /
YEL(yellow) / CYN(cyan) / GRN(Green) / MAG(magenta) / RED(red) / BLU(blue).
Default setting is "BLK".
● SUBMENU OF BLC:
BLC OSD:
H-POS: setting the position of the range of backlight area to left and right. Default setting is "8".
V-POS: setting the position of the range of backlight area in the ZONE NUM to up and down.
Default setting is "7".
H-SIZE: increase and decrease the size of the range of backlight area horizontally.
Default setting is "3".
V-SIZE: increase and decrease the size of the range of backlight area in the ZONE NUM vertically.
Default setting is "3".
● SUBMENU OF WDR
WEIGHT: Setting the effect, LOW / MIDDLE / HIGH selectable Default setting is "MIDDLE".
RETURN: return to upper menu
5
. DAY&NIGHT
Setting day and night mode, EXTERN / AUTO / COLOR / B&W selectable.
EXTERN: select this when the color is controlled by CDS sensor.
AUTO: camera will automatically show color image in high lux and black/white image in low lux.
COLOR: only displayed color image.
B&W: only displayed black/white image.
● SUBMENU OF EXTERN DAY & NIGHT
ANTI-SAT
EXTERN S/N
AGC THRES
AGC MARGIN
DELAY
RETURN
IiiiiiIiiiiiI 7
LOW
IiiiiiIiiiiiI 11
IiiiiiIiiiiiI 8
LOW
DAY & NIGHT
6.
COLOR
1) AWB: Setting the white balance mode: AUTO / AUTOext / PRESET / MANUAL selectable.
2) COLOR GAIN: Setting the thickness of color, from 0~20. Default setting is "10".
● SUBMENU OF MANUAL WHITE BALANCE:
1) C-TEMP: Setting the color temperature of surveillance area, 3000K / 5000K / 8000K selectable.
2) R-GAIN: Setting red gain from 0~20. Default setting is "10".
3) B-GAIN: Setting blue gain from 0~20. Default setting is "10".
V00150213-U(1)
VCC-7400SDI-H
