manualshive.com logo in svg

Benelli Tornado Naked Tre 1130, Owner'S Manual, Page: 27 / 55

Share
Download
Benelli Tornado Naked Tre 1130 Owner'S Manual Download Page 27

Tornado  Tre 1130

Tornado  Tre 1130

49

50

5.6.1

Adjusting rear suspension spring
preload

Adjust the spring preload by means of the two ring nuts
(

A 

and 

B

) shown in the figure. Unloose the ring nut (

A

)

and adjust the preload using the ring nut (

B

).

Turn clockwise for a stiffer preload.
Turn anticlockwise for a softer preload.
Once the adjustment is over, tighten the ring nut (

A

).

5.6.2

Adjusting rear suspension rebound
damper hydraulic device

Adjusting of the rebound damper hydraulic device is made
in jerks. Turn the rule (C) clockwise to increase the
braking action, or turn anticlockwise to decrease it.

5.6.3

Adjusting rear suspension compression
damper hydraulic device

Adjusting of the compression damper is made in jerks.
Turn the rule (

D

) clockwise to increase the braking action,

or turn anticlockwise to decrease it.

5.6.4

Hydraulic compression braking system at
high-speed back - wheel suspension

Adjusting of the compression damper is made in jerks.
Turn the rule (

E

) clockwise to increase the braking action,

or turn anticlockwise to decrease it.

E

Summary of Contents for Tornado Naked Tre 1130
























































Reviews:

No comments