16
BENELLI BRAVO
16
First loosen the rear axle nut and turn the
adjusting nut to the left or right to correct the
slack of the chain. While adjusting the chain,
you must also keep the front wheel chain
aligned with the rear. After adjustment, re-fix
the rear axle nut, lock the adjustment nut and
perform a final check to make the distance
between the two sprockets is 10-15 mm.
The open end of the chain spring should be
opposite to the chain movement direction
S
Sa
ad
dd
dlle
e a
ad
djju
us
st
tm
me
en
nt
t::
1.
Pull the saddle to check whether the saddle is loose or skewed.
2.
When adjusting the height of the saddle, pay attention to minimum and
maximum insert length.
3.
Always tighten the saddle clamp after adjustment, and check the saddle before
each ride.
B
Br
ra
ak
ke
e a
ad
djju
us
st
tm
me
en
nt
t
1.
Check the condition of your brake regularly. To check, while ride normally, hold
front then rear brakes at different times. The rear wheels will lock the motion of
bike and the front wheels will quickly slow down and the bicycle will tip forward.
2.
Adjust the distance between the brake pads and the rim to adjust braking
effect. Please consult professional servicing provider if unsure.
3.
Replace the brake pads if they are severely worn (more than 2/3), always replace
the left and right brake pads together at the same time.
4.
After adjusting the brake, be sure to tighten the brake wire fixing screws
5.
Rubber brake pads should not be contaminated with any grease. If they are
contaminated with grease, their braking performance will be greatly reduced,
and they must be replaced.
Movement
direction
Chain
spring
BENELLI BRAVO
17
Summary of Contents for Mantus MTB
Page 24: ......
