INSTRUCTIONS FOR USE
(to be carefully stored for further consulta on)
Read these warnings carefully before installing the ceiling.
1.
Remove the apparatus from the packaging and check its integrity. In case of doubt do not proceed to the assembly and
contact your reseller.
2.
Do not install the device in an environment without adequate ven la on.
3.
Before the electrical connec on it is necessary to check that the data of the power supply network correspond to those
specified in this manual.
4.
The electrical connec on shall be made by qualified personnel. Before making the electrical connec on, make sure you
have removed voltage from the grid.
5.
Do not misuse the device (different use for which it was designed). The manufacturer may not be held liable for damage
resul ng from improper, erroneous and unreasonable uses.
6.
Do not install the device in environments with dangerous atmospheres.
7.
Installa on shall be carried out as instructed by the manufacturer; incorrect installa on may cause damage to persons,
animals or things for which the manufacturer cannot be held liable.
8.
Do not allow the device to be used by children or disabled persons without supervision.
9.
Cleaning is restricted to the external surface of the appliance.
NOTE: DO NOT use DETERGENTS, DETERMINATIONS, WINDOW DETERMINATIONS, PLASTICS AND THE like. Use only a so ,
slightly moist pan.
10.
In case of malfunc on, do not tamper with the device. For repair, please contact qualified personnel.
11. Do not a ach the device to a fragile wall or in bad condi on.
PART OR SUBSTANCE INSTALLATION
1.
Remove the staff by pressing inwards and simultaneously the two bu ons placed at the ends of the ceiling (Fig. 1a and
1b). The staff will detach automa cally.
2.
A ach the bar to the wall using the two les (fig.2).
3.
Make electrical connec ons respec ng the voltage and frequency indicated on the plate data and respec ng the
specified L -N polarity). Make sure that no conductor has exposed copper fragments.
2.700K 3.000K 4.000K
SWITCH
KORA 25W LED
COD. 4500-V2, 4499-V2
