Benefon DRAGON TDP70WN, Service Manual

Page: 10 / 76

5.9.2000
6DP_70GB.fm 2
Product: TDP70WN / Installation Instructions
3.1.2 To program Using the Phone Keys
1. Connect the QPS50 localbox via maintenance adapter to your phone, and
turn the phone on.
,
will be flashing in the display in stand-by mode.
2. Press and the following text will appear in the display: ***BENEFON***.
3.1.2.1 Sales Date
1. Choose SELECT. The following text will appear in the display:
SALES DATE [XXXXXX].
2. Choose CHANGE. [XXXXXX] will be replaced by the date
[daydaymonthmonthyearyear]. Remember to check that the date is correct.
If the date is correct, choose
SAVE. If the date is incorrect, delete it by
choosing and enter the correct date (six digits in the following form:
daydaymonthmonthyearyear). To save the date, choose SAVE.
It is possible to program the sales date ONLY ONCE, which means that you
will not be able to change it again afterwards. If the sales date has not been
programmed, your phone will not enter the normal stand-by mode.
3.1.2.2 Radio Path Identification
1. Press , and the following text will appear in the display:
RADIO PATH ID [XXXXXXXXXX].
2. Choose CHANGE. Enter the radio path identification (ten digits), and
save the identification by choosing SAVE. Remember to check that the
radio path identification is correct.
3.1.2.3 Own number
1. Press : own number [+ XXXX...X]
2. Choose CHANGE. Enter the own number (follow the instruction of the
operator), and save it by choosing SAVE. Remember to check that the own
number is correct.
Note! SMS doesn’t work if the own number has not been programmed.
3.1.2.4 Phone Code
1. Press , and the following text will appear in the display:
PHONE CODE [XXXX].
2. Choose CHANGE. Enter the phone code (four digits), and save the code
by choosing SAVE.
3.1.2.5 Y1 Y3 ID (Additional operator indicator)
It is possible to change old/add new operator indicator which operates in
automatic roaming mode. (network selection mode: Automatic)