Benedetto The Signature of Jazz Guitar, Owner'S Manual & Warranty

Page: 14 / 28

12
Tuning Machines
Benedetto ® uses only the fi nest tuning machines. These machines are pre-lubricated,
die-cast, sealed tuners, which do not require periodic oiling for smooth operation.
A small tension adjustment screw is located at the end of each tuner’s button
that also holds the button in place. If the tension is too loose, the machine
may slip and go out of tune easily. If it is too tight, the button may become
very dif
fi cult to turn. Make sure that the adjustment is fi rm, but not too tight.
The plating on Benedetto tuning machines may become degraded from the
acids and oils in
fi nger sweat. Wipe the machines off with a soft dry cloth
after each use to preserve their appearance and function.
Strings that have not been secured properly to the tuning machine post may easily
slip and go out of tune. This problem is commonly misdiagnosed as an issue with
the tuners. Check your string installation carefully.
See illustrations 1, 2, and 3.
Changing Strings
A new set of strings can breathe renewed life into your instrument. That is why
many “tone-conscious” touring professionals change their strings before every
performance. While there is no set rule on how often to change strings, we have
found that most players do not change them nearly as often as they should.