6
1.
Carefully remove the crating and packing
materials.
CAUTION!
Be careful when cutting steel
banding material as items may become loose and fall
causing personal harm or injury.
2. Check the voltage, phase and proper amperage
requirements for the motor shown on the motor plate.
Wiring should be performed by a certified electrician
only.
INTRODUCTION
IMPORTANT SAFETY INSTRUCTIONS !
Read these safety instructions entirely!
IMPORTANT NOTE!
Do not attempt to install this lift if you have never been trained on basic automotive lift installation
procedures. Never attempt to lift components without proper lifting tools such as forklift or cranes.
Stay clear of any moving parts that can fall and cause injury.
1.
READ AND UNDERSTAND
all safety warning
procedures before operating lift.
2
KEEP HANDS AND FEET CLEAR.
Remove hands
and feet from any moving parts. Keep feet clear of lift when
lowering. Avoid pinch points.
3.
KEEP WORK AREA CLEAN.
Cluttered work areas
invite injuries.
4. Consider work environment. Do not expose equipment
to rain.
DO NOT
use in damp of wet locations. Keep area
well lighted.
5. Only
TRAINED OPERATORS
should operate this lift all
non- trained personnel should be kept away for work area.
Never let non-trained personnel come in contact with, or
operate lift.
6.
USE LIFT CORRECTLY.
Use lift in the proper manner.
Never use lifting adapters other than what is approved by
the manufacturer.
7.
DO NOT
override self-closing lift controls.
8.
REMAIN CLEAR
if vehicle is in danger of falling.
9.
CLEAR AREA
if vehicle is in danger of falling.
10.
ALWAYS
Insure that the safeties are engaged before
any attempt is made to work on or near vehicle.
11.
DRESS PROPERLY.
Non-skid steel-toe footwear is
recommended when operating lift.
12.
GUARD AGAINST ELECTRIC SHOCK.
This lift
must be grounded while in use to protect the operator from
electric shock. Never connect the green power cord to live
terminal. This is for ground only.
13.
DANGER!
The power unit is used on
this lift contains high voltage. Disconnect
power at the receptacle before performing
any electrical repairs. Secure plug so that
it can not be accidentally plugged in during
service.
14.
WARNING! RISK OF EXPLOSION.
This equipment has internal arcing or
sparking parts which should not be exposed
to
fl
ammable vapors. This machine should
not be located in a recessed area or below
fl
oor level.
15.
MAINTAIN WITH CARE.
Keep lift
clean for better and safer performance.
Follow manual for proper lubrication and
maintenance instructions. Keep control
handles and /or buttons dry, clean and free
form grease and oil.
16.
STAY ALERT.
Watch what you are doing. Use
common sense, be aware.
17.
CHECK FOR DAMAGED PARTS.
Check for
alignment of moving parts, breakage of parts or any
conditions that may affect its operation. Do not use lift if any
component is broken or damaged.
18.
NEVER
remove safety related components from the
lift. Do no use lift if safety related components are damaged
or missing.