PL-7000 Series Product Label Positioning
A
B
PL-7000XR_Safety_Placard.pdf
Trim: 6.5”W x 10.5”H
Material: 2 Mil. White Adhesive Vinyl
Ink: U.V. protected CMYK 4/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection
PN 5905569
PN 5905350
FRONT
BACK
LABELWarning_Pinch_Points_Small-5905350.pdf:
Trim: 15” W x 1.5” H
Material: 2 Mil. White Adhesive Vinyl
Ink: U.V. protected CMYK 4/C Process
Finish: Polished
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear-gloss over-laminate for abrasion, chemical, and ultra violet protection
Warning
Never place any object or any part of your body on the legs or any other part of
the lift during operation. Serious injury or death can occur.
Warning
ALWAYS double-check under clearance BEFORE driving vehicle under lift platform.
Warning
• Read the entire operation manual before operating this parking lift.
• NEVER leave the lift unattended when it is partially raised or lowered.
• DO NOT raise the lift platform when the lift is empty. The lifts are designed to be lowered with the
weight of a vehicle on the platform. Empty lifts will take much longer to lower.
• Always use caution when operating this lift. Never allow children or persons under the influence of
drugs or alcohol to use this lift.
• Serious injury, property damage, and/or death can occur if this lift is improperly used.
• Keep hands and feet clear. Remove hands and feet from any moving parts. Keep feet clear of lift
when lowering. Avoid pinch points.
• Only trained operators should operate this lift. All non-trained personnel should be kept away from
work area. Never let non-trained personnel come in contact with, or operate lift.
• Guard against electric shock. This lift must be grounded while in use to protect the operator from
electric shock.
• Risk of explosion. This lift has internal arcing or sparking parts which should not be exposed to
flammable vapors.
• Maintain lift with care. Keep lift clean for better and safe performance. Follow manual for proper
lubrication and maintenance instructions. Keep control handles and/or buttons dry, clean and
free from grease and oil.
• Stay alert - watch what you are doing. Use common sense and always be aware.
• Check for damaged parts. Check for alignment of moving parts, breakage of parts or any condition
that may affect safe operation of the lift. Do not use lift if any component is broken or damaged.
• Never remove safety related components from the lift. Do not use lift if safety related components
are damaged or missing.
IMPORTANT NOTE
The custom lock-setting of the lift determines the height of the vehicles that can be safely parked
underneath the lift. Make sure that you are using only vehicles that are of the proper
height for the custom lock-setting. If the setting of your lift needs to be changed,
contact your parking lift dealer.
PARKING LIFT
OPERATION WARNINGS
Read the entire operation manual, and operation instructions shown on the reverse side of this
placard before operating this parking lift. If any questions arise as to the safety or operation of this
lift contact your property manager, building engineer, local parking lift dealer or call BendPak at
1 (805) 933-9970. Always use caution when operating this lift. Never allow children or persons
under the influence of drugs or alcohol to use this lift. Serious injury, property damage, and/or
death can occur if this lift is improperly used.
PARKING LIFT
OPERATION INSTRUCTIONS
PRE-LIFTING STAGE
1. Drive top vehicle onto the elevating platform. Vehicles may be driven in nose first or backed in.
2. Drive until the top vehicle’s forward tires rest against the forward wheel stop.
3. Turn off car engine, engage safety brake, and place the vehicle’s gear selector in Park. If vehicle is
manual transmission, place the transmission in first gear.
4. Walk to the rear of the platform and lift up on the red handle to engage the rear tire stops.
5. Check the front of the lift to make sure that the vehicle’s forward tires are securely set against the
wheel stop.
6. Walk around the lift to ensure no obstructions will interfere with the vehicle being lifted.
7. Position yourself in front of the lift within reach of the operator control console.
LIFTING STAGE
1. Once all precautions above are followed, check around and above the lift to ensure that no objects are
in the platform’s way, and that no persons (except the lift operator) are within 10 feet.
2. To raise the lift platform with top vehicle to desired height, turn the operator switch on the control
console to the right position and hold.
3. During operation, observe the entire perimeter of the lift as well as overhead to ensure there are no
obstructions that may damage vehicle and / or lift.
4. ALWAYS raise the platform until it reaches its top custom-set lock position.
5. If a low ceiling is overhead be careful when lifting. NEVER allow the top vehicle to come in contact
with any overhead structure or object.
6. Once top position is reached, release the operator switch to its neutral position then turn and hold the
operator switch to the left position to lower the platform with vehicle onto the lift’s mechanical locks.
Hold the operator switch in the left position until the platform is resting securely on the locks.
7. Walk around, never under the raised platform.
REMOVAL OF LOWER VEHICLE
1. Carefully drive out the lower vehicle after making sure all is clear before lowering the lift platform.
LOWERING THE LIFT
1. Walk around the lift to make sure nothing is below or near the lift platform’s entire lower area to
prepare for descent.
2. Be certain that no person (except the lift operator) is within 10 feet of the lift area.
3. Turn and hold the operator switch to the right position to elevate the lift approximately two inches or
enough to allow release of the mechanical locks and release operator switch to its neutral position.
4. While pulling back and holding the lock release safety lever located below the control console, turn and
hold the operator switch to the left position to lower the lift platform with top vehicle.
5. When lowering the lift always be watchful for objects, persons or animals that may wander
under the lift platform during operation. Cease operation if area becomes obstructed.
6. KEEP HANDS AND fEET CLEAR Of ALL mOVINg PARTS AND PINCH POINTS.
7. Release the lock release safety lever and operator switch upon full decent of platform.
8. Walk to the rear of the lift and lower the wheel stops / ramps.
9. Carefully drive out the lower vehicle after making sure all is clear before lowering the lift platform.
PLACEMENT OF LOWER VEHICLE
1. Once all precautions of the Pre-Lifting and Lifting Stage have been followed, drive the lower vehicle
under the lift platform until the forward tires reach the front wheel bar, or, to the location where the car
is properly positioned under the lift to allow clearance of the doors and mirrors.
2. Turn off the engine, set the parking brake and place in the gear selector in Park, or place manual
transmission in gear.
Read the entire operation manual and warning instructions shown on the
reverse side of this placard before operating this parking lift.
P/N 5905569
THERMAL PLASTIC LAMINATED 5mil
NOTE:
laminate should overlap print at least 4mm
