AV8OR User’s Guide Appendix
Pub. No D200803000008 Page 7-11 Rev 3 Apr 2009
© Honeywell International Inc. Do not copy without express permission of
Honeywell.
WXWORX XM WEATHER RECEIVER SERIAL
SETUP
To configure the AV8OR to receive weather data from the WxWorx
XM Weather Receiver, perform the following steps:
Attach the cable from the WxWorx XM Weather Receiver (supplied
with the WX XM Weather Receiver) to the USB port on the AV8OR.
From the Aviation Main Menu, tap the
soft key to open the
System Setup Menu.
Highlight the
Device Setup
option and tap the
SELECT
soft key to
show the
Device and Port Setup
page.
On the Device and Port Setup page, the configuration steps are:
•
If the
Position Source
is set to
Serial
, it must be changed
to
Internal
or
Bluetooth
since there is only one RS232 port
available
.
•
Set the Weather
Port
to
Serial.
•
Set the Weather
Type
to “
WxWorx
”. When finished the
Device and Port Setup page should look like Figure 7-5.
Figure 7-5: WxWorx XM Weather Setup
Refer to the WxWorx user guide for how to activate your subscription
to XM weather.
