3
Learn Mode
1.
To select the “LF learn function,” use the up/down
arrow keys and then press OK.
2. Follow the instructions above for the “LF initiate
function” to activate the Tire Pressure Monitoring
System (TPMS) sensor.
3.
Depending on the sensor series, different screens will
be displayed.
NOTE:
For Black Series sensors, the
same information shown above will be displayed. For
Gold Series sensors, only the sensor ID # is displayed.
4. Press and release the button to activate another
sensor, or press the button to return to the main
menu.
Changing the Settings
From the main menu, use the up/down arrow keys to
select “options” and then press OK.
See Figure 7
for the
settings menu displays.
• The “LF POWER” option is used to adjust the strength
of the activation signal.
NOTE:
It is recommended to
use the factory default setting. Adjusting the signal
too high or too low may impair the sensor reception.
•
The “UNITS” option is used to select between Metric
and Imperial units.
• The “BUZZER” option allows you to enable or disable
the internal buzzer.
•
The “CONTRAST” option allows you to adjust the
contrast of the LCD screen.
• The “AUTO OFF” option changes the length of time
before the tool turns off when not in use.
Figure 7 – Settings Menu
Check the Battery Level
See Figure 8.
Press and hold the button to display
the tool’s current battery charge level.
Figure 8 – Battery Level
Charging the BT36 LF Maintenance Hand Tool
See Figure 9.
When the BT36 Low-Frequency (LF)
maintenance hand tool’s battery level is low, use the
supplied wall charger and USB cable to charge the tool
by plugging it into the USB cable on the back of the BT36
LF maintenance hand tool.
Figure 9 – Charging Port
Updating the BT36 LF Maintenance Hand Tool
The software in the BT36 LF maintenance hand tool may
occasionally be updated to add more features. To update
the BT36 LF maintenance hand tool to the latest software,
perform the following steps:
1. Install and run the WebVT software that came on the
CD with the BT36 hand tool.
2. Plug the BT36 LF maintenance hand tool into a USB
port of your computer using supplied the USB cable.
3. Turn the device on by pressing the button.
4.
If a software update is available, a screen will appear
indicating “Update Device.” Follow the on-screen
instructions to update the software.
