BENDIX BIW 85, Operating And Installation Instructions

Page: 18 / 32

18
Maintenance and Cleaning
Before any maintenance or cleaning is carried
out you must DISCONNECT the appliance
from the electricity supply
Descaling
The water we normally use contains lime. It is a good
idea to periodically run a high temperature wash with
detergent or use a descaler in the machine. Do this
separately from any laundry washing, and according to
the manufacturer's instructions. This will help to prevent
the formation of lime deposits.
After each wash
Leave the door open for a while. This helps to prevent
mould and stagnant smells forming inside the appliance.
Keeping the door open after a wash will also help to
preserve the door seal.
Maintenance Wash
With the use of low temperature washes it is possible to
get a build up of residues inside the drum.
We recommend that a maintenance wash be performed
on a regular basis.
To run a maintenance wash:
* The drum should be empty of laundry.
* Select the hottest cotton wash program
me .
* Use a normal measure of detergent, must be a powder
(such as Ariel Futur).
External cleaning
Clean the exterior cabinet of the appliance with soap
and water only, and then dry thoroughly.
Clean the control panel using a damp cloth only.
Do not use abrasives
Cleaning the dispenser drawer
From time to time the washing powder and additive
dispenser drawer should be cleaned.
Remove the drawer by pulling it out firmly. Flush it out
under a tap, to remove any traces of accumulated
powder.
Cleaning the drawer recess
Having removed the drawer, use a small brush to clean
the recess, ensuring that all washing powder residue is
removed from the upper and lower part of the recess.
Replace the drawer and run the rinse programme for a
few minutes without any clothes in the drum.
AL021
AL033
P0185