Dimensions
Width
45 cm
Height with worktop
85 cm
Height without worktop
82 cm
Max depth
60 cm
Max depth with open door
115.9 cm
Electrical connection
Voltage
220/240 V - 50 Hz
Motor rating during wash
200 W
Power of heating element
1900 W
Overall power
2100 W
Water supply pressure
Minimum
50 kPa (0.5 bar)
Maximum
800 kPa (8 bar)
Capacity
8 place settings
Technical specifications
6
Adjusting the worktop
You can move the worktop forward or backward by
25 mm in order to align the machine with other kitchen units.
Simply unscrew the two rear retaining screws, move the top to
the required position and then retighten the screws.
Fitting under a counter
(kitchen worktop or sink)
By removing the machine’s worktop, you can install it under a
close fitting sink unit or a pre-existing top, providing the
dimensions of the recess correspond to those shown in the
picture.
Proceed as follows:
-
Remove the machine’s worktop by unscrewing the two front
retaining screws, pull from the front and slide out the rear
slots, lifting the worktop.
Insert the machine after adjusting height and levelling with the
adjustable feet. When inserting the machine, ensure that the
water inlet and drain hoses are not kinked or squashed.
820
570 - 6
0
600
