Operation and configuration
36
VMR420_D00370_00_M_XXEN/07.2018
Alarm relay 1: Activating the category simulated alarm
5.5.5
Setting delay times
Use this segment to set a response delay
t
on1
(0…300 s) for K1, and
t
on2
(0…300 s) for K2, a start-up delay
t
(0…300 s) for device start, as well as a com-
mon delay on release
t
off
(0…300 s) for K1 and K2.
This setting is only relevant when the fault memory M is deactivated.
The operating steps for the setting of the response delay
t
on1
and the start-up
delay
t
are illustrated by way of example.
Setting the response delay
4x
3x
>1,5 s
2x
2x
>1,5 s