Operation and setting
15
4. Operation and setting
4.1 Unpacking
Unpack all the parts supplied with the system. Do not use tools with sharp edges which
might damage the content of the package. Compare your order with our delivery note to
check that you have received all products in full. The article number printed on the
nameplates provides an easy means of uniquely identifying each device.
4.2 Commissioning
4.2.1
Setting up
Set the UNIMET® 1100ST down on an even surface with the accessories carrier face up. The
carrying handle also serves as a stand so that the UNIMET® 1100ST can be set down on an
even surface. Set up the handle as follows:
1. Pull both adjusting wheels (1) towards the handle (2) and keep hold of them.
2. Move the handle to the required position.
3. Let go of the two adjusting wheels (1). Move the handle a little until the adjusting wheels snap
into place.
4.2.2
Connection of keypad purchased as an optional accessory
1. Push the two grip ends (2) on the fixing axes inwards at the same time. Slot the keypad into
place and let go of the grip ends.
2. Connect the connecting cable for the external keypad to the keypad bush on Unimet.
Check all parts supplied for any evidence of damage in transit. Equipment
damaged in transit must not be used. If a device has sustained damage, please
contact BENTRON®. Details of who to contact are indicated on the delivery
documents.
When storing the devices in an environment where the temperature is wintry
and cold: Leave the devices to stand for 3 to 4 hours at room temperature before
connecting the power supply. When the devices are moved from a cold to a
warm environment, condensation will be evident on all parts. Putting damp
devices into operation risks damaging electrical components and there is a
danger of electric shock on contact.
1
2
1
1
2
Summary of Contents for UNIMET 1000ST
