Bender UNIMET 1000ST, Operating Manual

Page: 14 / 100

System description
14 TGH1256en/10.2005
3.5 Operating elements
1 Test socket: The DUT’s power supply cord is plugged in here.
2 10 bushes (1…10) for the connection of patient electrodes.
3 Colour LCD with backlighting
4 Set-up and carrying handle
5 Measuring sockets
- [B] (violet) for the connection of the single-pole measuring cable supplied with the product.
- [A] for the active test probe (TP2) with pushbutton supplied with the product.
- Bush [C] for equipotential bonding (e.g. connection for single-pole line extension with clip
for the testing of permanently installed equipment).
- Bush [D] for functional earth
6 Connection for the TM1000 keypad module integrated in the housing cover.
7 Info key
8 Function keys 1…6
9 ENTER key
10 Positioning feet
11 Power switch with thermo-magnetic circuit breaker
12 Socket outlet with earthing contacts, 16 A for external printer, switched via power
switch (11).
13 Permanently attached power supply cord for connection to the supply voltage.
14 Nameplate
15 Interfaces (viewed from top to bottom):
- Printer
Centronics interface for printer connection.
Important: Only connect printers that are not earthed. Follow the
instructions in chapter “Printer” on page 87.
- RS-485 Serial interface for BENTRON® Service
- RS-232 9-pole galvanically isolated serial interface for connection with computer
systems or barcode scanner.
16 Rugged metal enclosure, with pushbuttons for safe storage in the accessories carrier or the
optional carrying bag.
3 2
1
6 7
5
BENDER
i
[E]
[C] [D]
[A] [B]
F1 F2 F3 F4 F5
F1: Gerätekatalog
F2: Typenkatalog
F3: Klassifikation
F4: Einzelmessung (Einzelprüfung)
F5: Systemverwaltung
1
2
3
4
5 6
7
8
9
10 RS 232
BENDER Unimet 1100 ST
Sicherheitstester /Safety-Tester
RS 485
4
8
10
14
9
12
13
11
15
16