Operation and setting
27
RCMA423AS_D00157_01_M_XXEN/08.2016
5.5
Display in menu mode
5.5.1
Parameter query and setting: overview
Menu
item
Adjustable parameter
AL
Response values query and setting:
– Residual current I2 (
I
Δ
n2
) (AL2)
– Residual current I1 (
I
Δ
n1
) (AL1)
– Hysteresis of the response values: % Hys
out
Configuration of the fault memory and the alarm relay:
– Activate/deactivate the fault memory or assign
continuous mode (on/off/con)
– Select N/O operation (n.o.) or N/C operation (n.c.)
individually for each K1/K2
– Specify the number of the reload cycles
– Assign the alarm category I1 (
I
Δ
n1
) or I2 (
I
Δ
n2
), relay test
or device error individually to K1/K2 (1, r1/ 2, r2).
t
Set delays:
– Response delay
t
on1
/
t
on2
– Start-up delay
t
– Delay on release
t
off
(LED, relay)
SEt
Device control parameter setting:
– Select the appropriate parameter for response values:
overcurrent mode (HI), undercurrent mode (Lo) or win-
dow mode (In).
– Enable or disable password protection, change the pass-
word.
– Restore factory settings.
– Service menu SyS blocked
InF
Query hard and software version
HiS
Query the first stored alarm value
ESC
Move to the next higher menu level (back)
