Benchmark BAKER ATLAS AM5K Series, User Manual

Page: 19 / 50

AM5KA Measure Head RevL Sep 2007 Page 19 of 50
4. Use a hook to pull the spring out far enough to remove the
screwdriver (Careful not to bend the spring).
5. Remove the floating encoder assembly.
6. Repeat for the other side.
7. Remove anti-rotation screw (if equipped).
8. Remove snap ring and pull out sliding shaft.
9. Remove the wheel assembly.
10. Re-assemble in reverse order.
4.4.6 INSTALLING THE LOAD AXLE WHEEL
1. Insert the tension wheel into the frame. Make sure the slotted hole
in the tension wheel bushing is on the same side as the roll pin hole
in the frame and the grease hole is on the opposite side.
2. Use a bolt in place of the load pin to hold it in place. Install an allen
wrench or other long tool to align the hole in the bearing with the
slotted hole in the frame.