A D 2 4 0 2 - 9 6 - O P E R A T I N G M A N U A L
Rear Panel
Detailed Information on the AD2402-96 Rear Panel.
F i g u r e 2 . A D 2 4 0 2 - 9 6 R e a r P a n e l
Analog Inputs
The analog inputs support balanced or unbalanced inputs. Input sensitivity is adjustable
in 2
dB steps. Maximum sensitivity is +14 dBu at full scale (0 dBFS). Minimum sensitivity is +24 dBu
at full scale (0 dBFS).
PLEASE NOTE: An internal absolute polarity inversion error was discovered some time
after the creation of the AD2402-96/AD2K+. The following table is revised from the
original and should be used instead of the original table.
Balanced Inputs: Pin 1 = Shield, Pin 2 = -Signal, and Pin 3 = +Signal.
Unbalanced Inputs: Pin 1 = Shield, Pin 2 = Signal Ground, Pin 3 = Signal.
Caution: Unbalanced inputs will not function properly if pin 2 is left un-
connected.
Chapter
3
18
