Benchmark 5044-035 Manual Download Page 8

7

of the product (15 A).

•  Do not use damaged extension cords. Examine the extension cord before using 

and replace it if damaged. Do not abuse extension cords and do not pull on any 

cord to disconnect the device.

•  Keep cord away from heat and sharp edges.
•  Always disconnect the extension cord from the power outlet before 

disconnecting the extension cord from the product.

•  To reduce the risk of electric shock, keep all connections dry and off the 

ground. Do not touch the plug with wet hands.

SERVICING OF A DOUBLE INSULTATED APPLIANCE

In a double insulated product, two systems of insulation are provided instead of 

grounding. Grounding means are not provided for a double insulated product, nor 

should grounding means be added to the product. Servicing a double insulated 

product requires extreme care and knowledge of the system and should only be 

done by qualified service personnel. Replacement parts for a double insulated 

product must be identical to the original parts. A double insulated product is 

marked with the words "Double Insulation" or "Double Insulated". Product may also 

be marked with symbol shown below.

Summary of Contents for 5044-035





















Reviews: