16
E-3: Game is Out of Tickets
This error occurs when Ticket Disperser does not sense the tickets.
Troubleshooting:
Check ticket bins have tickets and are loaded onto the ticket dispenser.
For Triple Ticket Dispenser trouble shooting please see ticket dispenser user manual
E-4: Ticket Dispenser Communication Error
This error occurs when the Ticket Dispenser is not communicating with the Main board.
Troubleshooting:
Check the 2 Pin plug going into the Ticket Dispenser Board.
1.
Check that there are no cold solder joints.
2.
Plug is not missing.
3.
Check that the Blue and Gray wires are connected and seated properly.
Check continuity on the Blue and Gray wires.
1.
Set their volt meter to Ohms
Ω
.
2.
Place prongs on both end one gray wire. You should have some resistance.
3.
Repeat step 2 for blue wire.
Check continuity between the blue and gray wires.
1.
Set their volt meter to Ohms
Ω
.
2.
Place one prong on Blue end and the other on Gray.
Check Power is going to Ticket Dispenser.
1.
On the board there are 2 lights.
a.
The VCC light. Should be on solid.
b.
The CPU light. Should be blinking.
2.
On the 4-pin connector check your voltage.
a.
Set your volt meter to V (DC) for voltage.
b.
Put the Red Probe onto the yellow power wire.
c.
Put the Black Probe onto any ground/common black wire on the game.
Check for any physical damage on board and harness.
Check Dispenser has the dipswitches all in the off position (if using the Intelli Triple Ticket Dispenser)
