options for number of allowed attempts for a vend are 1 through 5, and “NO LIMIT”.
Depressing Button 1 will change the setting. Depressing Button 2 will display the next
option, “TICKETS PER 1 BILL”.
14.) TICKETS PER 1 BILL
If the Tickets-To-Prizes has a bill validator, then the number of tickets given for a $1 Bill can
be specified. Depressing Button 1 will set the number of tickets from 1 to 100. If Button 1 is
held depressed, the value will continue to change. If Button 1 is released and then depressed
again, the value will change from increasing to decreasing or vice versa. Depressing Button 2
will display “TICKETS PER 5 BILL” and the same procedure is used for the $5 Dollar Bill
as well as $10 and $20. When Button 2 is depressed after the $20 Bill setting then “TICKETS
PER COIN” will be displayed. If the Tickets-To-Prizes has a coin mechanism, then the same
procedure is followed to set the number of tickets awarded per coin. Depressing Button 2 will
then display “TICKET MULTIPLIER”
15.) TICKET MULTIPLIER
If the Tickets-To-Prizes has ticket Takers, this option sets the “value” of the accepted ticket.
For every valid ticket that is inserted, the total displayed is increased by this value. Also, the
change dispensed from the Ticket Dispensers is calculated in the same manner. For example,
if the Ticket Multiplier is 5, then for every ticket inserted, 5 is added to the total, and 1 ticket
is dispensed for every 5 in change. Depressing Button 1 will change the value from 1 to 10 in
increments of 1. Depressing Button 2 will display “INPUT TYPE”.
16.) INPUT TYPE
There are three types of input that the Tickets-To-Prizes will accept: Tickets, Receipts, and
Cardswipe Input. Depressing Button 1 will change the Input Type between Tickets, Tickets
and Receipt, Receipt Only, or Cardswipe. The Tickets Only option is the default, and allows
for Ticket Insertion and payment of change in Tickets. The Tickets and Receipt Option
allows for Ticket insertion OR Barcoded receipt, and gives change by printing a barcoded
receipt. Receipt Only allows for acceptance of barcoded receipt only. The cardswipe option is
selected if the Tickets-To-Prizes is to be interfaced with a cardswipe system. Depressing
Button 1 changes the Input Type. Depressing Button 2 will display the next option. If the
Input Type includes Tickets, then go to the next option, else skip to Option #20.
17.) ENTER BARCODE?
If the Input Type includes Tickets, then the option to enter the 4-Digit barcode for the tickets
to be used can be entered. Depressing Button 1 will display “ENTER BARCODE” and the
current setting. Depressing Button 2 will display “TICKET SECURITY”. Depressing Button
1 again will change the first digit from 0 to 9, then back to 0. Depressing Button 2 will
advance to the next digit. After the last digit, Depressing Button 2 will display “TICKET
SECURITY”.
18.) TICKET SECURITY
If the Input Type includes Tickets, then this option sets the security level for Ticket
acceptance. A setting of 0 is for Notch Only Required, and the barcode is not checked. A
setting of 1 is the default setting and requires at least 80% barcode validation for ticket
acceptance. A setting of 2 is the most stringent setting, but be advised that the barcode printed
on the ticket must be absolutely perfect for it to be accepted with this setting. Depressing
Button 1 changes the Security Level, and depressing Button 2 will display “EATER SAFE
MODE”.
8
Summary of Contents for Tickets To Prizes
Page 1: ......
