Programming Options
1.)
Entering Programming Mode
To enter program mode, press and hold
the left button (SW1)
1
located on the Power
Distribution Board
2
. After 2 seconds,
“TOTALS” will appear on the LCD
Display
3
. At this time, release the button.
“COINS IN” with the number of coins
received will be displayed. The game is now
in Program Mode
. PLEASE NOTE
that from
this point forward, the left button (SW1)
1
and the right button (SW3)
4
on the Power
Distribution Board
2
are the buttons used.
These buttons are referred to on the LCD
display as Button 1 and Button 2 respectively.
Each programming option is displayed on the LCD Display, with the functions shown for
Button 1 and Button 2.
2.)
COINS IN
The total coins received through the coin mechanism are displayed. The total will
rollover to zero when it reaches 1,000,000. Depressing button 2 will display “TICKETS
OUT”.
3.)
TICKETS OUT
The total tickets dispensed are displayed. The total will rollover to zero when it reaches
1,000,000. Depressing button 2 will display “BILLS IN”.
4.)
BILLS IN
The total bills received are displayed. The total will rollover to zero when it reaches
1,000,000. Depressing button 2 will display one of two options:
If there are tickets that have not been dispensed, the Display will show “CLEAR TICKETS
OWED?”, otherwise it will display “ENTER PROGRAM MODE?”
5.)
“CLEAR TICKETS OWED?”
This option is displayed if there are tickets that are owed that have not been dispensed,
and will show the number of tickets. Depressing Button 1 will clear these tickets from the
system, and “TICKETS CLEARED” will be displayed. Depressing Button 2 will display
“ENTER PROGRAM MODE?”
6.)
“ENTER PROGRAM MODE?”
Depressing Button 1 at this time will enter the area of Program Mode where parameters
may be changed. Depressing Button 2 will return the game to Run Mode.
7.)
“ENTER PASSCODE”
To be able to change programming parameters or reset the counters, a 4-digit passcode
must be entered. The default passcode is 0000. To enter the passcode, Depress Button 1 to
change the digit from 0 to 9, then press Button 2 to move to the next digit. After all digits
have been entered correctly, depressing button 2 will Display the first programming option,
“CHANGE PASSCODE?”.
4
