background image

 

                                                                                                           OPERATION AND MAINTENANCE MANUAL 

 

                                                                                                                                                                                   Page 3 of 22 

General details 
 

Producing firm: 

BENASSI SpA 

 

Via Lampedusa, 1 

 

Tel. 0039 051 820534     Fax 0039 051 6826164 

 

e-mail: [email protected] 

 

www.benassispa.it 

 

This manual has been written by the Industrial Engineer Mr CIAVAGLIA Sergio 
Global Service Italia Srl - 63029 Servigliano (ITALIA) 
 

Introduction 

Dear Customer, 
this manual has been written thanks to the considerable experience we have acquired so far. Its purpose is 
to help you in operating the machine properly during all the phases of its life. 
 
The manual should be kept with the machine, in a safe place, accessible to all those who need to consult it. 
 

Those who have not read, understood and learned the instructions of this manual must not operate 
the machine. 
Should the manual be lost or spoiled, please ask your retailer for a copy, giving him all the relevant 
information about the machine
 

The manual and the declaration of conformity should always be kept with the machine, both when it 

is sold and when it is hired, and until the hire ceases. 

Information about the guarantee 

We remind you that, before using this REVERSIBLE TWO-WHEEL TRACTOR, all those who will drive 
it must be informed about the conditions of use and cautioned against unsafe practice. This manual 
contains all such information, and through it you can obtain the best performance of the machine. 
We have actually found that many of the troubles that have been reported should be mainly ascribed to the 
operator’s inattention or to wrong maintenance and/or adjustments. 
As  a  consequence,  we  cannot  accept  claims  for  compensation  for  damage  caused  by  wrong 
handlings or for loss of liabilities due to the impossibility to work when the machine is broken. 
All  the  electrical  and  mechanical  parts  that  undergo  normal  wear  and  tear  are  not  covered  by 
guarantee. 
DURATION OF THE GUARANTEE 
The guarantee has a maximum duration of 24 months. 
For mechanical parts, the guarantee only covers spare parts; it does not cover the labour nor the travelling 
expenses connected to assembly. 
If any faulty parts have to be repaired, they should be sent to us carriage paid. We will repair and ship them 
carriage forward. 

When ordering spare parts, always give the following details: 

  Model Number 

  Year of production 

  Model Number 

 

The  instructions,  the  pictures  and  the  information  contained  in  this  manual  are  a  technical  and 

reserved  property  of the  producing firm and cannot be reproduced  with any means, neither in  whole nor in 
part. 

 

Summary of Contents for MC 3300























Reviews: