FT 155
7
MAINTENANCE
•
To change the oil or to perform other maintenance operations on the motor (spark plugs, air filter, adjustments), refer to the
motor instruction manual provided.
N.B. To unscrew the oil drain cap of the motor, remove the rear cover (Fig.2 Ref. B).
•
Make a regular check of the oil in the gearbox (Fig. 10 Ref. "C")
•
Every 200 hours change the oil completely by unscrewing the oil drain cap (Fig. 10 Ref. "B"). Empty out and screw back
the cap. Fill the box from cap "C" (Fig. 10) until the oil level just reaches the hole. Use only recommended oil.
•
For any servicing, especially during the warranty period, seek the assistance of a dealer-authorized repair shop. Make a
regular check that screws are tightened, specifically the screws fastening the bar to the relative support.
•
When the blade does not cut adequately, it should be disassembled, sharpened and balanced. An unbalanced blade may
damage the machine with vibrations.
-Fig. n°8- -Fig. n°9-
-Fig. n°10-
