S.p.A.
BT 2001 R
13
Fig. 5'
13) STARTING THE MOTOR
For information concerning the engine, read the
Use and Maintenance Manual.
Check before starting the engine:
Ø
Check the fuel level; use the recommended fuel.
See Technical data and characteristics
Ø
Check the oil level in the engine.
Starting
Sit correctly on the driver’s seat. Make sure that the park
brake is on. Fig.6 Réf.5. Make sure that the gear change
lever (fig.6 Ref. 7) and forward/reverse lever (Fig.6
Ref.2) are in neutral position. Press the clutch pedal (Fig.5
Ref.1) to close the starting switch, and turn the key as
follows:
O= No circuit connected.
I= Switching on tools and indicators (working
position).
II= Starting the engine.
When engine starts: release the key; the key automatically
returns to the working position I.
ATTENTION
The clutch pedal is fitted with a safety switch which
prevents the engine from starting if the pedal is not
completely pressed.
Check the indicators and the control tools.
Before starting, when the key is in the I position, check
that the indicators Ref.7 and Ref.8 (fig. 3) light.
If an indicator doesn’t light, probably a bulb has burnt out.
Before using the tractor, change the faulty bulb.
With the engine running, and before starting to use the
tractor, check that all the indicator lights on the
dashboard are off.
ATTENTION
If the oil pressure indicator doesn’t go out, this could be
caused by a problem in the electric system or by the
failure in checking as indicated in the chapter “Checking
before Starting”.
If the ignition light doesn’t go out, this could be due to an
insufficient supply from the alternator.
Eliminate every problem, before going on.
Make sure that all control levers are engaged. Release the
clutch pedal gradually. (Fig.5 Ref. 1).
At the end of the work, check the hours counter and the
fuel level. (Ref.10 and Ref.6 Fig.3). Warm up the engine.
ADVICE
If the engine doesn’t start, return the key to position 0,
wait a moment and try again.
14) STOPPING THE ENGINE
Disengage both gear control levers.
Engage park brake lever Fig.6 Ref.5
Lower engine r.p.m.
Turn key from position I to position 0. Ref.1 Fig.3
Suspension
adjustment for
driver’s seat
weight (from 50
Kg. to 130 Kg.)
Control for the
longitudinal seat
adjustment.
(movement of 60
mm.)
