Benair BeanGateway User Manual Download Page 69

Page: 69 / 75

“

Rethinking sensing technology

”

Document version : 2.8

BeanGateway® User Manual

Document type : User Manual

Please consider the environment before printing this document.

Page : 69 / 75

•

The WSNmapping concerns all the Beandevice® profile. The WSN

mapping is backuped on the BeanGateway® flash memory. When a
new BeanDevice® joins a WSN, its profile is transmitted to the
BeanGateway® and the BeanScape®.

•

The BeanScape® displays the WSN Mapping with the BeanDevice®

profile;

•

WSN Mapping is backuped on the BeanScape® Database.

Step 3: WSN

Mapping

transmission

BeanDevice®

profile Transmission

ACK

BeanDevice®

profile are

backuped on

BeanScape®

Database

BeanDevice®

profile are

backuped on a

Flash memory

Summary of Contents for BeanGateway












































































Search results

Summary of Contents for BeanGateway

Reviews:

Related manuals for BeanGateway

Brands by name

Popular brands

Benair BeanGateway, User Manual

Search results

Summary of Contents for BeanGateway

Reviews:

Related manuals for BeanGateway

Brands by name

Popular brands