background image

4

5

SAFETY PRECAUTIONS

IMPORTANT SAFEGUARDS

 

When using electrical products, especially when children are present, 
basic safety precautions should always be followed. 

READ ALL INSTRUCTIONS  BEFORE USING

 

Do not overtighten any connections.

 

For use with 120V 60Hz: Power supply must be a 15 Amp GFCI outlet.

 

The electrical cord must be connected to a GFCI outlet.

 

The GFCI outlet should be 1 ft. above the floor.

 

Install only in well-ventilated areas to avoid excess humidity.

 

Do not install in narrow toilet stalls or in shower stalls.

 

Install only where direct contact with water is minimized.

 

Do not install near any heat source.

 

Avoid using extension cords if possible. Consult with a certified electrician 
where extension cords are necessary.

DANGER - TO REDUCE THE RISK OF ELECTROCUTION

 

Do not use while bathing.

 

Do not place or store product where it can fall or be  
pulled into a tub or sink. 

 

Do not place or drop into water or other liquid,

 

Do not reach for a product that has fallen into water. Unplug immediately.

WARNING - TO REDUCE THE RISK OF BURNS, ELECTROCUTION 

OR INJURY TO PERSONS:

 

Close supervision is necessary when this product is used by, on,  
or near children. 

 

Use this product only for its intended use as described in this manual. 
Only use attachments recommended by the manufacturer.

 

Never operate this product if it has a damaged cord or plug, if it is not 
working properly, has been dropped or damaged, or has been dipped into 
water. Return the product to a service center for examination and repair.

 

Keep the cord away from heated surfaces.

 

Never drop or insert any objects into any opening or hose.

 

Do not use outdoors or operate where aerosol (spray) products are being 
used or where oxygen is being administered.

 

Connect this product to a properly grounded outlet only.  
See grounding instructions.

 

Unplug this product before filling. Fill (reservoir) with water only. 

SAVE THESE INSTRUCTIONS

Summary of Contents for HAVEN 3000














Reviews: