14
15
INSTALLATION
CAUTION - Do not plug in until installation is finished.
Not doing so may damage the appliance.
If electric work is needed, please contact a qualified
electrician or serviceman only.
Remove the Existing Toilet Lid and Seat
1. Remove the nuts, washers, and cone packings from the toilet seat
and mounting bolts in the back of the toilet.
2. Remove the toilet seat, lid, and mounting bolts.
3. Keep them in case you need them.
Toilet Size (Elongated & Round Front)
The toilet dimensions must be within
those shown on the right. Do not install
this appliance on a toilet that does not
meet these dimensional requirements.
Occupied Sensor
1. This appliance is equipped with
an occupied sensor.
2. The unit will not work unless
the seat is occupied.
Mounting the Plate
Place the mounting plate over each
mounting hole. Insert the mounting
bolts through the plate and mounting
holes. Slide cone packings and washers
onto the bolts and fasten tightly
with nuts.
