26
27
INSTALLATION (CONT.)
4. Water Supply Hose
5. Installation
Catch Plate
6. Bolt & Nut Assembly
7. Assembly
8. Flexible Tube
•
Remove existing supply tube
from fresh tank
•
If your shut off valve is 1/2”
O.D compression size, use
supplied 1/2” conversion nut
as shown above.
•
Slide cone packing and
washers onto the bolts then
fasten to securely mount
bidet seat to toilet.
1. Slide this product onto the catch
plate centering the unit with
the guide arrows on the base.
2. You will hear a click once this
product is securely mounted
to the catch plate.
3. This product will feel a little
loose on the toilet bowl. Adjust
the fit from front to back and
side to side for balance.
4. Tighten the nuts on
both bolts securely.
5. Check for any water leaks.
•
Place the plate and guides
over each mounting hole.
Insert the mounting bolts
through the plate and
mounting holes.
•
Connect the flexible tube from
side of T-Valve to this product,
Open the Angle Stop valve to
fill water.
•
Check for any water leaks.
•
Customers should use the
new hose set provided with
the product. Do not use used
set again.
Summary of Contents for bioBidet Bliss BB1700
Page 1: ...OWNER S MANUAL BB1700 ...
