INST
ALLA
TION
INST
ALLA
TION
Toilet Tank
T-Valve
Toilet Hose
Bidet Hose
(Optional)
1/2” Conversion Nut
Shut-off Valve
Washer
5. Connect the Water Hoses
1. Install the t-valve onto the toilet tank. Ensure the rubber gasket is
properly seated inside the t-valve.
2. Connect the provided toilet hose to the water shut-off valve
and t-valve. You may also use your existing toilet hose.
3. Connect the bidet hose to the bidet seat and t-valve.
4. Open the water shut-off valve. Check for any leaking or dripping.
Use a wrench to tighten any loose connections.
*Shut-off valves may vary. If supplied parts do not fit, please call
847.458.2334. Alternate fittings may be available upon request.
Rubber Washer
*Inside T-valve
(Optional) May use
existing toilet hose
6. Plug It In!
1. Remove the adhesive cover from the back of bracket and
place the bracket where desired.
2. Insert supplied batteries and close the battery cover.
3. Ensure the batteries are inserted properly according to polarity.
Check for any water leaks. Plug the power cord into a dedicated 120V
power outlet and the LED light will start flashing. Wait until the LED light
stops flashing. Press the “Posterior” or “Feminine Wash button to fill the tank.
Adhesive Tape
Wall
7. Mounting the Remote
*Inside conversion nut